Featured Product

Interior Care
All Purpose Dressing Concentrate
SKU: SVR76872 / SVR76873 / SVR768741 L / 5 L / 20 LDashboard polish
The concentrated workshop format of our all-purpose dressing, dilutable up to 1:4 with water so each shop can set its own sheen and cost per car. Cleans, shines and UV-protects dashboards, vinyl, rubber and exterior plastic.
Size:
Login to request technical documents (TDS / MSDS)
Key Features
Concentrated Formula: Use neat for high gloss or dilute up to 1:4 for a matte satin.
Workshop Economy: 1 L, 5 L and 20 L packs cut the cost per vehicle.
Clean & Dress in One: Lifts light dust and finger marks as it protects.
Anti-Static Film: Treated surfaces attract far less dust.
UV Protection: Guards vinyl, rubber and plastic against fading and cracking.
Interior & Exterior: Dashboards, door cards, seals, bumpers and engine bays.
How to Use
1
Clean the surface first and remove heavy soiling with an interior or all-purpose cleaner.
2
Shake or stir the container before decanting.
3
Use neat for exterior trim, bumpers and engine bays; dilute 1:2 to 1:4 with water for interiors.
4
Apply with a cloth, sponge, applicator pad or low-pressure sprayer, then level with a clean cloth.
5
Buff lightly with a dry cloth for a lower-sheen finish.
6
Avoid the steering wheel rim, pedals and instrument lenses; store sealed at 5–35 °C.
Product Details
SOLVAR General Purpose Dressing is supplied in 1 L, 5 L and 20 L containers for car wash centres, detailing shops and fleet workshops.
The concentrate is built on the same silicone-emulsion and mild-cleaner system as our ready-to-use spray, but at higher solids: used neat it gives a rich, glossy dressing for exterior trim and engine bays, and diluted 1:2 to 1:4 it becomes a light, matte-satin interior dressing that will not glare on the windscreen. One 20 L drum covers hundreds of interiors.
It cleans light dust as it dresses, leaves an anti-static film that repels dust rather than attracting it, and screens vinyl, rubber and plastic against UV fading, drying and cracking. Apply by cloth, sponge, applicator or low-pressure sprayer to dashboards, door cards, consoles, seals, bumpers, wheel arch liners and engine bay plastics. Manufactured by CHEMIX LAB – New Borg El Arab, Alexandria, Egypt.



